Main rotor diameter: 622 mm (24.5 inch)
Tail rotor diameter: 135 mm (5.3 inch)
Overall Length: 590 mm (23.2 inch)
All-up weight: 600 ~ 635g (Battery includ)
Driven system: Brush Motor
Servo: 4X 9.1g (spe 0.12sec/60? torque 1.1kg/cm / dimension 22.5X11.8X27mm) Servos and WK-G007 outside Gyro
ESC: WT-B20A spe controller
Battery: 12V 650mAh Ni-MH
Feature:
New 7 channel Transmitter with PIT and PLT mode lock switch, adjustable knob , rudder mixing, throttle curve, servo exponential function, rudder exponential functions, and multistage electricity volume show on the panel
7 Channel R/C Set includ, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
Brand new design for the structure; Metal main frame
NOR collective pitch structure make perfect 3D maneuvers such as roll, invert, and swoop flights
The autorotation landing system, made of high quality one-way bearing, imally protects your helicopter from damage
Highly efficient bevel wheel design is us in mesh between main gear and motor gear
Outer-rotor motor as the main power is powerful and makes the flight much stable
120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly ruc
CCPM mode with adjustable pitch system and 3D conversion
Autorotation landing protection
One-way bearing and landing system with flameout function
Tail rotor driven by belt transmission system provide stable flight and low noise
Mode lock switch to free lock the parameters of PIT & PLT
Main rotor driven by powerful Brush Motor and tail rotor driven by belt transmission system
NO TAIL Motor - Tail Rotor driven by belt transmission system with Servo Controll Rudder Gas-Helicopter
notice:1mm=1cm,2.54cm=1inch ,1m=100cm
